Green Laser Module

Laser Diode Module, 505nm 520nm 515nm 532nm Dot Line Cross Line

The green laser diode is the new technic process component needs higher driving voltage. And the wavelength is in 505nm 515nm 520nm There are much better stability and wide temperature operating range to green laser diode module. And the green laser diode size is small if not include the driving circuit and heat sink. The green laser diode module is the trend to replace the traditional DPSS 532nm green laser module because high performance.

Specification

Size
(mm)

Laser Pattern

Output Power
(mW)

Wavelength
(nm)

Operating Voltage
(DC)

Operating Mode

Datasheet

Ø4.5x10

(Out of PCB)

Dot

<0.5,<1,<5,<10

520

3V/5V

APC/ACC+CW

Ø6x10

(Out of PCB)

Dot

<0.5,<1,<5,<10

520

3V/5V

APC/ACC+CW

Ø8x32

Dot

<0.5,<1,<5,<10,<30

505/520

3V/5V

APC/ACC+CW

Ø10x30

Dot

<1,<5,<10,<30,<50

505/520

3V/5V

APC/ACC+ PWM

Ø10x35

Line/Cross Line

<1,<5,<10,<30

505/520

3V/5V

APC/ACC+CW

Ø12x40

Dot

<1,<5,<10,<30
<50,<80

505/520

3V/5V

APC/ACC+CW

Ø12x40

Line/Cross Line

<1,<5,<10,<30
<50,<80

505/520

3V/5V

APC/ACC+CW

Ø12x35

(with direction)

Line/Cross Line

<5,<10,<30

505

3V/5V

APC/ACC+CW

<5,<10,<30
<50,<80,<130

520

Green Diode Laser Module
The green laser diode is the new technic process component needs higher driving voltage. And the wavelength is in 510nm to 520nm range not the exact green color defined 530nm. There are much better stability and wide temperature operating range to green laser diode module. And the green laser diode size is small if not include the driving circuit and heat sink. The green laser diode module is the trend to replace the traditional DPSS green laser module because high performance.

Body Options
Standard body diameter  type are available. These are as follows:
●  Standard :4mm, 6mm(without PCB), 8mm, 9mm, 12mm, 20mm
●  Please note we have a number of other body sizes. If the listed sizes do not meet your requirements please contact us
Lens Options
Elliptical collimated beam or focussed spot
●  PMMA Lens:(plastic aspheric lens) is suited for applications wherespace is critical and a cost effect solution is required.
●  Glass lens:Produces an elliptical collimated beam or focussed spot.
Optional Line/Cross line Lens Assemblies
●  PMMA line/ cross line lens:   fan angle options(15°,30°,45°,60°,90°,110° line  & 15°,58°,110° cross line)
●  Glass line/ cross line lens:   fan angle options( 110° line & cross line)
●  Powell line lens : fan angle options(15°,30°,45°,60°)
Costomized Laser Pattern :Diffractive Optical Element
A range of diffractive optical elements (DOE) are available to provide various patterns such as crosses, circles and dot matrix for applications such as 3D mapping, surface texture analysis, alignment and general machine vision applications. Please see the Projection Lens Datasheet for further information

Power Options 

The  laser module have standard output power as follows:
●  Class I  0.5mW (0.25-0.45mw)
●  Class II 1mW (0.7-0.9mw)
●  Class IIIA 5mW (2.5-3.5mW)
●  Class IIIB 50mW(38-45mW)
●  Csotom wiith your requirements

Driver Types

APC or ACC  driving circuit 
●  APC(Auto Power Control): automatically adjust the input current in order to output a constant value of optical power
●  ACC(Auto Current Control):a way have a constant value of input current, while the output power may vary.
●  ClassII or ClassIIIA laser module commonly used APC driving circuit, Of course, what drives depends on your application needs.
CW mode or PWM mode
●  CW (continuous wave mode): A conventional control method, continued to light up the work
●  PWM(Pulse Width Modulation):Direct Drive PWM laser is available with a TTL driver board that allows the unit to be gated on and off;
Operating Voltage
●  3V/5V DC are standard laser operating voltage,we also can suply  such as 12V DC or 24V DC if needed,and the minimum diameter can be done 8mm;
●  MXTLASER can be supplied with a mains adaptor which runs on 110-240V AC input and has one output to power the laser,If you require a custom lead length please contact us

Note

  • Customized Lasers:In the event that none of our standard products meet your exact requirements,our customized design service provides single prototypes and small production runs in just a few days.
  • Let us help you find the right solution for your project! If you have any questions, please feel free to contact us.

Ordering Code

Related Products
GET A FREE QUOTE NOW!

MXTLASER focused on semiconductor laser product manufacturer. Welcome To Contact Us.

Contact Form Demo (#3)